Varilight White Dual Voltage 240V/115V IP41 Shaver Socket Screwless Primed and Ready to Paint

Description

Description Varilight Dual Voltage Shaver Socket 240/115 Volts, on a vertical Double Plate, suitable for use in bathrooms, toilets and shower rooms (IP41). ………………………………………….. VARILIGHT Sockets have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. ………………………………………….. The Varilight Socket, like all our products, is designed to meet the latest European Safety Legislation. ………………………………………….. It is important to select the correct Sockets for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us. ………………………………………….. Appearance, Function and Applications What paint can I use? – You can use any paint, which will give you a variety of finishes. How many coats will it typically take to finish them well? – Varilight recommend 3 coats for emulsion, which can be applied by brush or roller, and at least 1 coat for spray paint. Will these conform to British Standards? – All our products conform to the BSEN Standards. Can I remove the paint once painted – if so how? – You can’t remove the paint unless you’re confident in sanding it off with sandpaper or similar, but you can over-paint the plate if you decide to change your wall colour. Do I still get a warranty once painted? – Warranty is for the working parts of the accessories, but not on the finish that has been applied. What colour do they come unfinished? – They are a slightly creamy off white when they’re unfinished. ………………………………………….. The Shaver Socket has a IP41 rating so is for use in bathrooms, toilets and any other room, although there should be no direct contact with water. One side of the Shaver Socket is 240V and accepts British and Continetal round pin and Australia flat-pin, the other side of the shaver is 115V and accepts Continental two-pin and America NEMA. ………………………………………….. Cleaning This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty. ………………………………………….. Product Instructions & Manuals – Wiring Accessories PDF – Screwless Fitting PDF