Hot

Varilight V-Pro High Power Series 1 Gang 0-300W Trailing Edge LED Dimmer Urban Brushed Brass Effect

£29.64

JYP601.BB Varilight V-Pro High Power Single 1 or 2 way 300 watt/30 LEDs push-on/off Rotary LED Dimmer on a Single Plate, Urban Brushed Brass Effect Bevelled Edge Plate and Polished Brass Knob.
This is a self-assembly kit made up of the Matrix Components: [WY1.BB + MJP300]

✔ V-Pro intelligent dimming technology
✔ Trailing Edge for dimming Mains Halogen, Incandescent bulbs and LEDs
✔ Dims most good quality LEDs, like Megaman or Mark Lighting
✔ Choice of dimming modes for wider compatibility
✔ Can be easily adjusted to change the minimum brightness of LEDs
✔ Soft start feature and intelligent overload protection
✔ Max Load LEDs = 300 watts, Halogen = 300 watt
✔ Min Load of 0 watt
✔ Max 30 LED Lamps
✔ Bevelled edge faceplate
✔ Fits in a 25mm Deep Wall Box

Availability: 10 in stock SKU: #JYP601.BB [WY1.BB + MJP300] Category:

Description

Description Varilight V-Pro High Power Series 1 Gang, for either 1 or 2 Way circuits, 0-300 Watt Push On/Off Rotary LED Trailing Edge Dimmer, on a Single Plate, for max 30 most good quality LEDs. You can load up to 30 LEDs per circuit (Dimming Module) as long as the lamps do not exceed 300 watts in total. The dimmer has special software with the ability to adjust the minimum brightness, and change the driving mode to Leading Edge. ………………………………………….. VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. ………………………………………….. The VARILIGHT V-Pro Series Dimmer, like all our products, is designed to meet the latest European Safety Legislation. ………………………………………….. It is important to select the correct dimmer switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us. ………………………………………….. Appearance, Function and Applications This dimmer is push on/off and rotary controlled, meaning to turn the dimmer on or off simply push the dimmer knob in and it will click back out; then to turn the brightness up or down, rotate the knob clockwise and anti-clockwise. ………………………………………….. V-Pro Push on/off dimmers are also suitable for either 1 way, or 2 way circuits. What does 1 or 2 way mean? It means you are able to use this type of dimmer for both 1 way circuits (1 dimmer controlling 1 light) and 2 way circuits (1 dimmer and 1 switch controlling the same light). If the lighting circuit is controlled by 1 dimmer and 2 switches (3 way), in seperate locations then one of the switches in the circuit must be an Intermediate Switch with four terminals enabling you to link all three switches together. ………………………………………….. The V-Pro Series are programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for numerous applications. ………………………………………….. V-Pro Series dimmer switches are trailing edge by default, Mode 1, this versatile mode is suitable for most dimmable LEDs and is also gentler on the load. Some types of dimmable LED perform best with Leading-Edge control, Mode 2 on the dimmer. Mode 3 is suitable for some external LED drivers. The driving modes can be easily changed by following the instructions under ‘Programming’ as shown in the dimmer instructions manual. ………………………………………….. Some LEDs are set to a default minimum brightness which may be too bright, the dimmer can be easily adjusted so the minimum brightness of the LED is set to your own desired setting. ………………………………………….. The V-Pro Series were primarily designed for Dimmable LEDs, the dimmers, with a minimum load of 10 Watts and maximum load of 300 watts, can operate at least 1-30 of the majority of quality dimmable LEDs on the market, it works especially well with the manufacturers, Megaman , and Mark Lighting . They are also suitable for halogen and incandescent lighting, most dimmable electronic transformers, with no minimum load, especially Varilight’s transformers and are suitable for dimmable low energy lighting. ………………………………………….. When using Electronic Low Voltage Transformers we recommend that a maximum of 5 good quality dimmable Electronic Transformers are used (10 if Varilight Transformers ) with this dimmer range. Please note: add the watts of the bulbs/lamps if using Varilight Transformers, to determine which wattage of dimmer to select, but if using another manufacturer of Transformer, add up the VA of the Transformers so it does not exceed the maximum of the dimmer. Please note that noise levels can depend on the quality of the Transformer being used. ………………………………………….. The V-Pro Series are equipped with some intelligent features: Soft-Start Technology, allows a longer life span of the bulbs or lamps used by increasing the brightness level softly, which also creates a welcoming effect; Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by either, stepping down the dimmer’s output to the lamps (if the watts are marginally overloaded), or the dimmer cuts out before there is any damage, (if the watts are grossly overloaded), until the load is reduced; Intelligent Thermal Protection which again stops damage to the dimmer, if it becomes too hot. ………………………………………….. 2 Way Dimming The V-Pro Series Push on/off Dimmers can be used in 2 way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2 way switching, they must be paired with a standard ‘2 way switch’ in the other location 3 way switching can be achieved by adding an ‘intermediate switch’ in to the circuit. When using V-Pro Series Push on/off Dimmers in a 2 or 3 way circuit the lights can only be dimmed from the location that the dimmer is situated in, if total dimming is preferred from many switched locations, in a 2, 3 or more way circuit then choose the Varilight Touch and Remote range of dimmers, in conjunction with Slave Dimmers, like the Multi-Point Remote , or Multi-Point Touch. ………………………………………….. Limitations The best dimmer series for dimming Electronic Low Voltage Transformers, including dimming more than 5 Transformers, is the V-Plus Series , which has many features including Overload Protection; Soft Start which is gentler on the load; and Dimmer Buzz Elimination, that can be created from the transformers. V-Plus can NOT dim LEDs. ………………………………………….. Please note V-Pro Dimmers are NOT suitable for use with wire-wound low voltage transformers, fans or inductive loads. For Rotary dimming of Halogen Lamps, please choose the V-Plus Series , which has many features including Overload Protection; Soft Start which is gentler on the load; and Dimmer Buzz Elimination, that can be created from the transformersor alternatively for Fan applications choose V-Dim Solid State Series , please check with manufacturer of appliance to be dimmed. ………………………………………….. For dimming lighting panels such as LED or CFL, choose the V-Com Series. ………………………………………….. These Dimmers are not suitable for Triac compatibility LED dimming, for this type of dimming, choose the V-Com Series. ………………………………………….. Cleaning This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a ‘Gasket’ on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty. ………………………………………….. Product Instructions & Manuals – V-Pro High Power Dimmer Instructions PDF – V-Pro Dimmer Series Compatibility Guide PDF – Compatibility Detailed PDF – Compatibility Overview PDF – Screwless Fitting PDF

Reviews

There are no reviews yet.


Be the first to review “Varilight V-Pro High Power Series 1 Gang 0-300W Trailing Edge LED Dimmer Urban Brushed Brass Effect”


Product Features


✔ V-Pro intelligent dimming technology
✔ Trailing Edge for dimming Mains Halogen, Incandescent bulbs and LEDs
✔ Dims most good quality LEDs, like Megaman or Mark Lighting
✔ Choice of dimming modes for wider compatibility
✔ Can be easily adjusted to change the minimum brightness of LEDs
✔ Soft start feature and intelligent overload protection
✔ Max Load LEDs = 300 watts, Halogen = 500 watt
✔ Min Load of 0 watt
✔ Max 30 LED Lamps
✔ Bevelled edge faceplate
✔ Brushed Brass Effect
✔ Fits in a 25mm Deep Wall Box
..................................................

Range: Urban

Finish: Brushed Brass Effect

Product Category: V-Pro Dimmer

Insert/Knob Colour: Polished Brass Knob

Dimensions: 91x91x45mm

Faceplate Depth: 8mm

Product Weight: 170g

Fixing Centres: 60.3mm

Recommended Back Box Depth: 25mm

Operating Voltage: 220/250V AC

Maximum Load Rating: LED: 300W (Halogen 500W)

Maximum Current Rating: 2.2A

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm


..................................................

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1