Hot

Varilight Special Series 1 Gang Dimmer for Multiple HF Dimmable Ballasts and LED Drivers 1-10V DC Input, 6 Amp Max Screwless Primed and Ready to Paint

£28.70

FDYP1M1VS.PD Varilight Special Single 1 or 2 way push-on/off Rotary Dimmer 6 amp on a Single Plate, Designed for one or more High Frequency Dimmable Ballasts, Dimension Screwless Primed Low Profile Plate (All Ready to Paint) And Polished Brass Knob.
This is a self-assembly kit made up of the Matrix Components: [WDY1VS.PD + MFP1M1]

✔ 1- or 2-way switching
✔ Suitable for controlling both mains and low voltage lighting
✔ Sleek, low-profile screwless faceplate
✔ Primed Plate all ready to paint

Availability: 10 in stock SKU: #FDYP1M1VS.PD [WDY1VS.PD + MFP1M1] Category:

Description

Description Varilight Special Series 1 Gang 6 Amp Dimmer, on a Single Plate, for either 1 or 2 Way circuits, designed for one or more High Frequency Dimmable Ballasts/LED drivers that Require a 0-10V (or 1-10V DC) Control Signal up to 20 mA. ………………………………………….. VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. ………………………………………….. The VARILIGHT Special Series Dimmer, like all our products, is designed to meet the latest European Safety Legislation. ………………………………………….. It is important to select the correct dimmer switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us. ………………………………………….. Appearance, Function and Applications What paint can I use? – You can use any paint, which will give you a variety of finishes. How many coats will it typically take to finish them well? – Varilight recommend 3 coats for emulsion, which can be applied by brush or roller, and at least 1 coat for spray paint. Will these conform to British Standards? – All our products conform to the BSEN Standards. Can I remove the paint once painted – if so how? – You can’t remove the paint unless you’re confident in sanding it off with sandpaper or similar, but you can over-paint the plate if you decide to change your wall colour. Do I still get a warranty once painted? – Warranty is for the working parts of the accessories, but not on the finish that has been applied. What colour do they come unfinished? – They are a slightly creamy off white when they’re unfinished. ………………………………………….. This dimmer is push on/off and rotary controlled, meaning to turn the dimmer on or off simply push the dimmer knob in and it will click back out; then to turn the brightness up or down, rotate the knob clockwise and anti-clockwise. ………………………………………….. Varilight Special Series Dimming function is virtually the same as 0-10V. The difference is that VARILIGHT 1-10V dimmers are 1 or 2 way and can be controlled in a 2 way setup with a standard switch. They also have a push on/off action to turn off the mains (0V position) whereas 0-10V will just turn down to a ‘0’ position. ………………………………………….. These types of dimmers require an extra two cores of cable as the dimming and switching functions are separate. The switching side is wired as a conventional switch to the mains and the dimming side is connected via the extra two core cable to the positive and negative terminals on the dimmable ballast/LED driver. Please see the wiring diagram on the instructions leaflet PDF for more information. ………………………………………….. Limitations Do not use this dimmerswitch for any other purpose or connect this dimmer to the mains, as your guarantee will be invalid. ………………………………………….. Please see recommendation of maximum loads in the Compatibility Detailed PDF. ………………………………………….. WARNING: The switch in this product is rated at 6 Amps MAXIMUM. Check the in-rush current for LED bulbs or drivers before connecting. Fit inrush current limiters where necessary. ………………………………………….. Cleaning This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty. ………………………………………….. Product Instructions & Manuals – Ballast Dimmer PDF – 1-10VDiagram PDF – Compatibility Detailed PDF – Compatibility Overview PDF – Screwless Fitting PDF

Reviews

There are no reviews yet.


Be the first to review “Varilight Special Series 1 Gang Dimmer for Multiple HF Dimmable Ballasts and LED Drivers 1-10V DC Input, 6 Amp Max Screwless Primed and Ready to Paint”

Product Features


✔ 1- or 2-way switching
✔ Suitable for controlling both mains and low voltage lighting
✔ Sleek, low-profile screwless faceplate
✔ Primed Plate all ready to paint
..................................................

Range: Primed

Finish: Primed Finish, already for painting to your own specs

Product Category: 2-Way Rocker Switch

Insert/Knob Colour: Polished Brass Rocker

Dimensions: 86x86x25mm

Faceplate Depth: 4mm

Product Weight: 130g

Fixing Centres: 60.3mm

Recommended Back Box Depth: 25mm

Operating Voltage: 220/250V AC

Maximum Load Rating: 10A

Maximum Current Rating: 10A

Terminal (Live) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²


..................................................

Intended Applications: Indoor Use Only. Domestic lighting circuits.

Safety Advice: Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-1