Varilight Fan Isolating 10 Amp Triple Pole Switch Screwless Primed and Ready to Paint

Description

Description Varilight 1 Gang, 10 Amp Triple Pole Fan Isolating Switch, on a Single Plate, an essential switch used to isolate the electrics of an extractor fan. ………………………………………….. VARILIGHT switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. ………………………………………….. The Varilight switch, like all our products, is designed to meet the latest European Safety Legislation. ………………………………………….. It is important to select the correct switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us. ………………………………………….. Appearance, Function and Applications What paint can I use? – You can use any paint, which will give you a variety of finishes. How many coats will it typically take to finish them well? – Varilight recommend 3 coats for emulsion, which can be applied by brush or roller, and at least 1 coat for spray paint. Will these conform to British Standards? – All our products conform to the BSEN Standards. Can I remove the paint once painted – if so how? – You can’t remove the paint unless you’re confident in sanding it off with sandpaper or similar, but you can over-paint the plate if you decide to change your wall colour. Do I still get a warranty once painted? – Warranty is for the working parts of the accessories, but not on the finish that has been applied. What colour do they come unfinished? – They are a slightly creamy off white when they’re unfinished. ………………………………………….. The triple pole Fan Isolator can be used in most rooms, although wet areas should be avoided, like bathrooms and shower rooms. In wet rooms, the Fan Isolator is put outside of the room. The role of the Fan Isolator, is to isolate the electrics to an extractor fan, so it can be easily removed for inspection, maintenance and repair. This switch is not only essential as a building requirement on a new build or extension but if installing a new extractor fan, it is wise to wire in a Fan Isolator too. ………………………………………….. Cleaning This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty. ………………………………………….. Product Instructions & Manuals – Wiring Accessories PDF – Screwless Fitting PDF