Varilight Euro Fixed Range Thermal Series 1 gang 60-400 Watt Dimmer European Screwless Satin Chrome Effect Finish

Description

Description European Fixed 1 Gang, 1 or 2 Way 60-400 Watt Push on/off with Rotary Dimming action, Leading Edge Thermal Protected Dimmer Switch, on a Single Plate. This Dimmer is Capable of Dimming incandescent lighting including mains and low voltage, but not LEDs. ………………………………………….. It is important to select the correct product for your application: For additional info, take a look at ‘Specs’ tab above and the Instruction Manuals on this page, if you need further help please contact us ………………………………………….. Appearance, Function and Applications This dimmer is push on/off and rotary controlled, meaning to turn the dimmer on or off simply push the dimmer knob in and it will click back out; then to turn the brightness up or down, rotate the knob clockwise and anti-clockwise. ………………………………………….. V-Dim Thermal dimmers are also suitable for either 1 way, or 2 way circuits. What does 1 or 2 way mean? It means you are able to use this type of dimmer for both 1 way circuits (1 dimmer controlling 1 light) and 2 way circuits (1 dimmer and 1 switch controlling the same light). If the lighting circuit is controlled by 1 dimmer and 2 switches (3 way), in seperate locations then one of the switches in the circuit must be an Intermediate Switch with four terminals enabling you to link all three switches together. ………………………………………….. The V-Dim Series Thermal Dimmers are Leading Edge and can be used with mains voltage lighting and good quality Low Voltage Electronic Transformers, mains incandescent GLS lamps (standard mains light bulbs), up to the maximum load as specified on the dimmer, GU10 or similar Hi Spot Mains Halogen lamps (only use good quality lamps) up to the maximum load as shown in the PDF instruction manual. ………………………………………….. The V-Dim Series are equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by either, stepping down the dimmer’s output to the lamps (if the watts are marginally overloaded), or the dimmer cuts out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. ………………………………………….. When using Electronic Low Voltage Transformers we recommend that a maximum of 5 good quality dimmable Electronic Transformers are used (10 if Varilight Transformers ) with this dimmer range. Please note: add the watts of the bulbs/lamps if using Varilight Transformers, to determine which wattage of dimmer to select, but if using another manufacturer of Transformer, add up the VA of the Transformers so it does not exceed the maximum of the dimmer. Please note that noise levels can depend on the quality of the Transformer being used. ………………………………………….. The V-Dim Thermal Series Push on/off Dimmers can be used in 2 way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2 way switching, they must be paired with a standard 2 way switch in the other location. 3-way switching can be achieved by adding an intermediate switch in to the circuit. When using V-Dim Series Push on/off Dimmers in a 2 or 3 way circuit the lights can only be dimmed from the location that the dimmer is situated in. ………………………………………….. Limitations The best suited dimmer series for dimming Electronic Low Voltage Transformers, including dimming more than 5 Transformers, is the V-Plus Series, which has many features including Overload Protection; Soft Start which is gentler on the load; and Dimmer Buzz Elimination, that can be created from the transformers. ………………………………………….. The V-Dim Series are NOT suitable for use with wire wound Transformers and other inductive loads. They can not be used on Fans either, choose a Fan Speed Controllers instead. Please check with manufacturer of appliance to be dimmed. ………………………………………….. These dimmers will NOT dim LEDs, if dimming LEDs choose either the V-Pro, or V-Com Dimmer Series. ………………………………………….. This product is not waterproof, therefore can not be used externally or in areas of moisture. ………………………………………….. Cleaning This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty. ………………………………………….. VARILIGHT Products have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. ………………………………………….. The VARILIGHT Products are designed to meet the latest European Safety Legislation. ………………………………………….. Product Instructions & Manuals – V-Dim Safety Dimmer Instructions PDF – V-Dim Dimmer Series Compatibility Guide PDF – Compatibility Detailed PDF – Compatibility Overview PDF – Screwless Fitting PDF