Hot

Varilight V-Pro IR Series 4 Gang Slave Unit for use with V-Pro IR Master Dimmers Classic Pewter Effect Finish

£66.29

IJRS004-SP Varilight V-Pro IR Quadruple Slave Unit for 2 way or Multi-way circuits only with circular Tactile Touch Buttons on a Double Plate, Classic Pewter Effect Bevelled Edge Plate and Polished Chrome Buttons [Master Dimmer is Required].

This product is Bespoke, it is non-returnable unless faulty as this product is hand made to order. Please allow up to 3 weeks to be built. Due to this product being Bespoke it can not be cancelled once you place your order, therefore please check you require this item before ordering.

✔ V-Pro IR intelligent dimming technology
✔ Trailing Edge for dimming most good quality LEDs, like Megaman or Mark Lighting
✔ Must be used with a Varilight V-Pro IR Master dimmer for 2+ way circuits
✔ Tactile Touch button for perfect dimming functionality
✔ Bevelled edge faceplate
✔ Fits in a 25mm Deep Wall Box

Availability: 10 in stock SKU: #IJRS004-SP Category:

Description

Description Varilight V-Pro IR Series 4 Gang multi-way tactile touch button dimming Slave, on a Double Plate, for use with the V-Pro IR Series Touch and Remote Master Dimmers only, for 2 Way and Multi-Way Circuits. The Master dimmer has special software with the ability to adjust the minimum brightness, and change driving mode to Leading Edge for LEDs. ………………………………………….. VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. ………………………………………….. The VARILIGHT V-Pro IR Series Dimmer, like all our products, is designed to meet the latest European Safety Legislation. ………………………………………….. It is important to select the correct dimmer switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us. ………………………………………….. Appearance and Function This V-Pro IR Slave Dimmer cosmetically has a circular metal button on view, behind which, is a concealed sprung micro-switch, which gives the button a tactile touch feel. To dim your lights, press and hold the button. To brighten, press and hold the same button. A quick touch will turn the lights on or off. If button is continuously pressed on, the lights will cycle up and down. This dimmer is a Slave dimmer. These Dimming Slaves are used together with V-Pro IR Series Touch and Remote Master Dimmers. One Master dimmer is required per circuit and if the circuit is 2 or more way, then V-Pro IR Slave dimmers must be used for the additional switch/dimmer locations, as normal on/off (rocker or impulse) switches cannot be used in conjunction with this type of dimmer. ………………………………………….. Applications This Slave dimmer, alongside its Master, can be used in many applications, from Home to commercial premises such as Offices, Bars, Nightclubs, Retirement and Nursing Homes. ………………………………………….. Software The V-Pro IR software, is contained in the Master dimmer, the Slave sends a signal via a link wire to the Master allowing dimming functionality. All our dimmers have the newest software that’s available, whenever Varilight creates an update, they update the software in our dimmer stocks too. ………………………………………….. 2 Way and Multi Way Dimming It is possible to use multiple dimmer switches in a single circuit when using the V-Pro IR Series, this is one massive advantage over conventional dimmers. The main switch where the live feed is present must be a Master Dimmer. The second switch, or 3rd switch (intermediate) must then be a Slave Dimmer. It is not possible to use a Slave Dimmer switch as a standalone dimmer in a 1 way circuit. Similarly, normal on/off rocker or impulse switches cannot be used in the circuit either. For 2-way circuits: 1 Touch and Remote Master Dimmer and 1 Slave dimmer is required. For 3 way circuits: 1 Touch and Remote Master Dimmer and 2 Slave dimmers are required. For multi-way circuits: 1 Touch and Remote Master Dimmer and as many Slave dimmers as are needed. ………………………………………….. Cleaning This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty. ………………………………………….. Product Instructions & Manuals – IJ Remote PDF – V-Pro IR Dimmer Series Compatibility Guide PDF – Compatibility Detailed PDF – Compatibility Overview PDF

Reviews

There are no reviews yet.


Be the first to review “Varilight V-Pro IR Series 4 Gang Slave Unit for use with V-Pro IR Master Dimmers Classic Pewter Effect Finish”


Product Features


✔ V-Pro IR intelligent dimming technology
✔ Trailing Edge for dimming most good quality LEDs, like Megaman or Mark Lighting
✔ Must be used with a Varilight V-Pro IR Master dimmer for 2+ way circuits
✔ Tactile Touch button for perfect dimming functionality
✔ Bevelled edge faceplate
✔ Fits in a 25mm Deep Wall Box
..................................................

Range: Classic

Finish: Pewter Effect

Product Category: V-Pro IR Dimmer

Insert/Knob Colour: Polished Chrome Buttons

Dimensions: 91x150x30mm

Faceplate Depth: 8mm

Product Weight: 230g

Fixing Centres: 120.6mm

Recommended Back Box Depth: 25mm

Operating Voltage: 220/250V AC

Maximum Load Rating: Refer to Master Dimmer

Maximum Current Rating: Refer to Master Dimmer

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²


..................................................

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P).

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1